Nitek PS115 Bedienungsanleitung PDF herunterladen

Installation Instructions

PS115 Power Supply

Note: This installation should be made by a qualified

service person and conform with local codes.

Reduce risk of fire or electrical shock do

not expose this product to rain or moisture.

Specifications

Size 1.75” H x 19.0” W x 8.6” D

Power Requirements 120 VAC

Output Voltage 24 and 28 VAC

Output Current 12 Amps

Enclosure Type Standard 19” rack,

1 RU in height

PS115 Dimensional Diagram

CX452 common hookup diagram

NITEK ®

5410 Newport Drive, Suite 24

Rolling Meadows, IL 60008

PHONE (847) 259-8900

FAX (847) 259-1300

WWW.NITEK.NET

Installation (PS115 and CX452)

The PS115 has five easy connect jacks for outputting power and is designed for use with

several different products, this section is for use with the CX452. Each of the PS115 power

output ports can supply up to 80 watts of power. Connect the PS115 power outputs to the

CX452, as shown in the diagram below, using the supplied jumper cables.

Care should be taken not to overload the PS115 outputs but if an overload does occur, the

outputs are individually protected from over current by an auto-resetting fuse. To reset a

PS115 output remove the problem power connector from the CX452. After fixing any over load

conditions, reconnect the power connector.

Refer to the CX452 instruction manual for details on the CX452 and the optional cards it uses.

19.0

8.6

1.75

CLASS 2

POWER OUTPUT

24-29VAC 50/60 Hz

3 Amp Max.

120 VAC

50/60Hz

5 Amps

5 A 250V

RISK OF FIRE -

REPLACE FUSE

AS MARKED

CAUTION

CLASS 2

POWER OUTPUT

24-29VAC 50/60 Hz

3 Amp Max.

CLASS 2

POWER OUTPUT

24-29VAC 50/60 Hz

3 Amp Max.

CLASS 2

POWER OUTPUT

24-29VAC 50/60 Hz

3 Amp Max.

CLASS 2

POWER OUTPUT

24-29VAC 50/60 Hz

3 Amp Max.

24-29VAC

50/60 Hz

3 amp max.

Class 2 only

COMMERCIAL

CCTV PRODUCT

21UP

E240043

Control Data

24-29VAC

50/60 Hz

3 amp max.

Class 2 only

24-29VAC

50/60 Hz

3 amp max.

Class 2 only

24-29VAC

50/60 Hz

3 amp max.

Class 2 only

24-29VAC

50/60 Hz

3 amp max.

Class 2 only

Video Port

Video PortVideo Port

Vid 4

Vid 3

Vid 2

+ Vid 1

Vid 1

VIDEO PORTS

T568B

12345678

2 1 4

WARNING

CX452

PS115

CAUTION: To reduce the risk of electric shock do not remove cover. No user-serviceable

parts inside. Refer servicing to qualified service personnel.

013012

1 2 3 4

Inhaltsverzeichnis

Seite 1 - NITEK ®

Installation Instructions PS115 Power Supply Note: This installation should be made by a qualified service person and conform with local codes.

Seite 2

PVX164 common hookup diagram Installation (PS115 and PVX164) The PS115 has five easy connect jacks for outputting power and is designed for use with

Seite 3 - UTPLinks

UTPLinks HEAD-END DISTRIBUTION In a head-end system all equipment is located together. There is no backbone copper and all of the horizontal runs ar

Seite 4 - Security Room

28 VAC Power SupplyCXM22 CardsSupports anddistributes RS422Patch PanelIDF - Telcom Closet28 VAC Power SupplyPatch PanelIDF - Telcom ClosetMDF - Main C

Kommentare zu diesen Handbüchern

Keine Kommentare

Nitek PS115 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Nitek PS115 herunter. Nitek PS115 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Nitek PS115